Oil, Gas & Offshore Equipment Online Auction

Starts
Closes
Inspection Inspection available on Monday the 7th of October from 9:00am to 12:00pm, and Monday the 14th of October from 9:00am to 12:00pm.
Location Welshpool Complex
453 Orrong Road , Welshpool, WA 6106
Contact Office (08) 9362 9777 Email

Collection

Goods to be collected from Wednesday the 16th to Monday the 21st of October, WEEKDAYS ONLY, from 8:30am to 4:00pm from Ross's Auctioneers & Valuers, 453 Orrong Rd, Welshpool, WA. (All goods must be removed by 4:00pm on Monday the 21st of October).

Buyers Premium & GST

A buyer's premium of 10.00% applies to this auction.
This auction is GST exclusive

Payment

Full Payment must be made within 24 hours.

Oil, Gas & Offshore Equipment Online Auction

AUCTION ITEMS INCLUDE

- 2023 AIR & GAS HOLDINGS TRAILER

- AS MAY STRUCTURE, 2 x COERCO 1000L TANKS

- HOOVER TANK, IBC TYPE 31A, DOM: 2013, 2082L CAPACITY

- 2007 INGERSOLL RAND 915CFM AIR COMPRESSOR

- KOHLER 375 KVA DIESEL GENERATOR, MODEL# KV375C2

- SAFERIDER ELECTRIC ZONE 2 MANRIDING WINCH

- CATERPILLAR C2.2 4-CYLINDER DIESEL MARINE GENSET

- GENELITE GENERATOR, MODEL# P18000

- GROVE M977 7250KG HYDRAULIC CRANE/HIAB WITH CONTROL BANK

- WORK BASKET WITH STANDING PLATFORM

- 4 x FIRENZE SCREW JACK COLUMNS, 15T CAPACITY EACH

- BLIND FLANGE HINGE - PERMANENT SIZE 1050mm/600, IN CASES

- BLIND FLANGE HINGE - PERMANENT SIZE 1200mm/600, IN CASES

- BLIND FLANGE HINGE - PERMANENT SIZE 900mm/900, IN CASES

- 13 x STRAUB FLEX ASSORTED SIZES, FROM 114.3mm to 451mm

- 2 x HYDRAULOC JACKS

- SINGLE SPOOL ROPE BLOCKS

- ENERPAC EQUIPMENT IN CRATE CONSISTING OF HYDRAULIC JUNCTION, BOX OF KZV2 HYDRAULIC CONTROL CENTRE 240V MOTOR, 5 x SHORT QUILLS & CASING TOOL

- HYDRAULIC POWER EQUIPMENT CONSISTING OF HYDRAULIC CONTROL CENTRE

- 5 x SITE BOXES


Inspection available on Monday the 7th of October from 9:00am to 12:00pm, and Monday the 14th of October from 9:00am to 12:00pm.

Condition of Site Entry

Enclosed Footwear MUST be worn onsite.


All items are sold ‘as is, where is’
All items at Ross’s Auctions are sold on an ‘as is, where is’ basis. This means the item is being sold in its current condition, regardless of any faults or damage. The bidder accepts full responsibility in satisfying themselves with the item prior to bidding. It is recommended that that if the bidder is in doubt, not to bid as no returns or refunds will be made. 


PICK UP: Goods to be collected from Wednesday the 16th to Monday the 21st of October, WEEKDAYS ONLY, from 8:30am to 4:00pm from Ross's Auctioneers & Valuers, 453 Orrong Rd, Welshpool, WA. (All goods must be removed by 4:00pm on Monday the 21st of October).

NOTE: To collect your goods, please ensure you have a valid form of Photo Identification present (such as a Driver's Licence) if you are requested to confirm your identity.

NOTE: Please adhere to the specified Collection Period to avoid any delays. All uncollected goods beyond the designated timeframe will be considered abandoned by the Buyer and subject to resale to recover Storage Fees. In the event of a late collection, a Late Collection Fee of $20 per item, per day, will apply starting AFTER the designated timeframe. Payment of all accrued fees of late-collected goods will be required for goods to be released.

Lot: 1
Qty: 1
2023 AIR & GAS HOLDINGS TRAILER

BLUE, TANDEM, JOCKEY WHEEL, 7 PIN RECTANGULAR TRAILER PLUG, SPARE TYRE, FRONT CHEQUER PLATE STORAGE BOX, 2 x FRONT HOSE REELS, AMMOTECH , 2 x FIRE EXTINGUISHERS, BLACKMER GAS COMPRESSOR MODEL#LB161B, 1 x LARGE AMMOTECH HOSE, REG NO - (UNLIC) VIN# 6K9A1RGASNW033004 (PLANT#1000) (WP#2944)

(*NOTE - HATZ MOTOR, CONTROL PANEL , NO KEY TO CONTROL PANEL*)
$2,400 (22 bids) Place Bid Add to Watch List
Lot: 2
Qty: 1
GAS MAY STRUCTURE, 2 X COERCO 1000L TANKS, L 3100 x W 2200 x H 1300mm, TYNE POCKETS, (B3682371)
Lot: 3
Qty: 1
HOOVER TANK, IBC TYPE 31A, DOM: 2013, 2082L CAPACITY, 284KG TARE, S#242873, 4250KG MAX GROSS, ASSET#SCR03 (B3452833)
Lot: 4
Qty: 1
2007 INGERSOLL RAND 915CFM AIR COMPRESSOR IN FULL DNV FRAMEMODEL HP 915 WCUO. SERIAL No 385717UDRC60. APPROX 1100 HRS6 CYLINDER DIESEL. APPROX DIMENSIONS L4500 X W2400 X H2600MM. WEIGHT 7300KG.

CAN BE LOADED ONTO LOW LOADER OR PURCHASER TO PROVIDE OWN CRAINAGE
$25,000 (1 bids) Place Bid Add to Watch List
Lot: 5
Qty: 1
KOHLER 375 KVA DIESEL GENERATOR MODEL KV375C2 WITH EXTENDED RANGE DIESEL TANK AND FULL DVN FRAME34 HOURS SHOWING. SERIAL No GC1103008BUNDED. APPROX DIMENSIONS L4978 X W2000 X H3654. WEIGHT 9300KG. SOME PAINT DAMAGE (SPOTS) TO CABINET

CAN BE LOADED ONTO LOW LOADER OR PURCHASER TO PROVIDE OWN CRAINAGE
$20,000 (0 bids) Place Bid Add to Watch List
Lot: 6
Qty: 1
KOHLER 375 KVA DIESEL GENSET MODEL KV375C2 WITH EXTENDED RANGE DIESEL TANK AND FULL DVN FRAME26 HOURS SHOWING. SERIAL No GC1103014BUNDED. APPROX DIMENSIONS L4978 X W2000 X H3654. WEIGHT 9300KG.

CAN BE LOADED ONTO LOW LOADER OR PURCHASER TO PROVIDE OWN CRAINAGE
$20,000 (0 bids) Place Bid Add to Watch List
Lot: 7
Qty: 1
SAFERIDER ELECTRIC ZONE 2 MANRIDING WINCH 3 PHASE. POWER 2.6KW. SWL 150KG IN TRANSPORT CRATE (OPEN). APPROX DIMENSIONS 1700 X 1200 X H1600MM
$2,000 (0 bids) Place Bid Add to Watch List
Lot: 8
Qty: 1
CATERPILLAR C2.2 4 CYLINDER DIESEL MARINE GENSET (WHITE) (8H3XL2.22NLC) ON FRAME
Lot: 9
Qty: 1
GENELITE GENERATOR MODEL# P18000, ASSET# 210 - GEN - 111, YOM: 2020, 13.6 KVA, 240V, S/N# PWE0034953, 7029 HOURS SHOWING, WITH KEY, EMERGENCY STOP BUTTON, BATERY ISOLATOR, FIRE EXTINGUISHER, 1 x LIFT POINT ON TOP, GREEN
Lot: 10
Qty: 1
GROVE M977 7250KG HYDRAULIC CRANE/HIAB WITH CONTROL BANKCAPACITY 7250KG @1M - 1250KG @6MON TRANSPORT FRAME. APPROX DIMENSIONS L2400 X W800 X H1600MM WEIGHT 1500KG

SELLER TO LOAD. COLLECTION BY APPOINTMENT
$4,000 (1 bids) Place Bid Add to Watch List
Lot: 11
Qty: 1
TERRATEC 850 LITRE BAFFLED HYDRAULIC OIL TANK (STEEL) APPROX L1800 X W600 X H700MM
Lot: 12
Qty: 1
4 x FIRENZE SCREW JACK COLUMNS 15T CAPACITY EACH IN WOODEN CRATE
Lot: 13
Qty: 1
SITE BOX, APPROX L1540 x W765 x H1190mm
Lot: 14
Qty: 1
SITE BOX, APPROX L1540 x W765 x H1190mm
Lot: 15
Qty: 1
SITE BOX, APPROX L1540 x W765 x H1190mm
Lot: 16
Qty: 1
WORK BASKET WITH STANDING PLATFORM, LIFTING POINTS, APPROX H2400 x W1600 x L2100mm
Lot: 17
Qty: 1
WORK BASKET WITH STANDING PLATFORM, LIFTING POINTS, APPROX H2400 x W1600 x L2100mm
Lot: 18
Qty: 1
2 x BLIND FLANGE HINGE - PERMANENT SIZE 1050mm/600 IN CASE
Lot: 19
Qty: 1
1 x BLIND FLANGE HINGE - PERMANENT SIZE 1200mm/600 IN CASE, 2 x BLIND FLANGE HINGE PERMANENT SIZE 1800mm/150 IN CASE
Lot: 20
Qty: 1
1 x BLIND FLANGE HINGE - PERMANENT SIZE 900mm/900 IN CASE, 2 x BLIND FLANGE HINGE - PERMANENT SIZE 1800mm/150 IN CASE
Lot: 21
Qty: 1
1 x BLIND FLANGE HINGE - PERMANENT SIZE 1200mm/150 IN CASE, 1 x BLIND FLANGE HINGE - PERMANENT SIZE 1800mm/150 IN CASE
Lot: 22
Qty: 1
2 x BLIND FLANGE HINGE - PERMANENT SIZE 1050mm/600 IN CASE
Lot: 23
Qty: 1
2 x BLIND FLANGE HINGE - PERMANENT SIZE 1800mm/150 IN CASES, 2 x ROLL FLANGE HANDLING UNITS IN CASES
Lot: 24
Qty: 1
2 x BLIND FLANGE HINGE - PERMANENT SIZE 1050mm/600 IN CASE
Lot: 25
Qty: 1
4 x BLIND FLANGE HINGE, PERMANENT SIZE 1800mm/150 IN CASES
Lot: 26
Qty: 1
2 x BLIND FLANGE HINGE - PERMANENT SIZE 1050mm/600 IN CASE
Lot: 27
Qty: 1
1 x BLIND FLANGE HINGE - PERMANENT SIZE 1200mm/600 IN CASE, 1 x BLIND FLANGE HINGE - PERMANENT SIZE 1800mm/150 IN CASE
Lot: 28
Qty: 1
PALLET WITH 13 x STRAUB FLEX ASSORTED SIZES, FROM 114.3mm TO 451.0mm
Lot: 29
Qty: 1
PALLET WITH ASSORTED HYDRAULIC JACKS, 6-20L PETROL JERRYCAN, ENERPAC PARTS, AND TURBO II AIR HYDRAULIC PUMPS
Lot: 30
Qty: 1
PALLET OF ASSORTED LIFTING CHAINS
Lot: 31
Qty: 1
2 X HYDRAULIC JACKS (YELLOW) 302401/302402. DIAM 400 X H310MM, WEIGHT 270KG EACH
Lot: 32
Qty: 1
3 x SINGLE SPOOL ROPE BLOCKS, 2 x 4 POOL ROPE BLOCKS
Lot: 33
Qty: 1
CAGE WITH ASSORTED FIRE EXTINGUISHERS, 2-9KG, UNKNOWN WORKING CONDITION
Lot: 34
Qty: 1
7 x CROWCON DETECTIVE + GAS DETECTORS IN CRATE
Lot: 35
Qty: 1
CRATE OF EYE LIFTING HOOKS
Lot: 36
Qty: 1
ENERPAC EQUIPMENT IN CRATE CONSISTING OF HYDRAULIC JUNCTION, BOX OF KZV2 HYDRAULIC CONTROL CENTRE 240V MOTOR, 5 x SHORT QUILLS & CASING TOOL
Lot: 37
Qty: 1
CRATE CONTAINING: HYDRAULIC POWER EQUIPMENT CONSISITING OF HYDRAULIC CONTROL CENTRE 240V MOTOR - 4 x SHORT QUILL, 4 x LONG QUILLS - CASING TOOL SIZE M56 x 3 & TOOL BOX WITH HAND TOOLS
Lot: 38
Qty: 1
METAL CABINET, TWO SHELVES, SOME RUST, APPROX H2000 x 1160 x 1160mm, (BO304)
Lot: 39
Qty: 1
METAL CABINET, ONE CENTRE SHELF, SOME RUST, APPROX H2000 x 1160 x 1160mm, (BO304)
Lot: 40
Qty: 1
METAL CABINET, ONE CENTRE SHELF, BACK PANEL DETACHED ON TOP CORNER, APPROX H2000 x 1160 x 1160mm, SOME RUST, (BO304)
Lot: 41
Qty: 1
CRATE OF SHACKLES - TENSION TURN BUCKLES & WIRE ROPE
Lot: 42
Qty: 1
2 x LOCKING FLANGES #SWP9713524 IN WOODEN CRATE
Lot: 43
Qty: 1
TYPHOON TOOLS SITEBOX, WHEELS, APPROX L1220 x W610 x H600
Lot: 44
Qty: 1
SITE BOX, CORROSION EVIDENCE, APPROX L1200 x W610 x H700mm
Lot: 45
Qty: 1
WIRE ROPE SLINGS ON PALLET ( REQUIRE RE CERTIFICATION )

Oil, Gas & Offshore Equipment Online Auction

AUCTION ITEMS INCLUDE

- 2023 AIR & GAS HOLDINGS TRAILER

- AS MAY STRUCTURE, 2 x COERCO 1000L TANKS

- HOOVER TANK, IBC TYPE 31A, DOM: 2013, 2082L CAPACITY

- 2007 INGERSOLL RAND 915CFM AIR COMPRESSOR

- KOHLER 375 KVA DIESEL GENERATOR, MODEL# KV375C2

- SAFERIDER ELECTRIC ZONE 2 MANRIDING WINCH

- CATERPILLAR C2.2 4-CYLINDER DIESEL MARINE GENSET

- GENELITE GENERATOR, MODEL# P18000

- GROVE M977 7250KG HYDRAULIC CRANE/HIAB WITH CONTROL BANK

- WORK BASKET WITH STANDING PLATFORM

- 4 x FIRENZE SCREW JACK COLUMNS, 15T CAPACITY EACH

- BLIND FLANGE HINGE - PERMANENT SIZE 1050mm/600, IN CASES

- BLIND FLANGE HINGE - PERMANENT SIZE 1200mm/600, IN CASES

- BLIND FLANGE HINGE - PERMANENT SIZE 900mm/900, IN CASES

- 13 x STRAUB FLEX ASSORTED SIZES, FROM 114.3mm to 451mm

- 2 x HYDRAULOC JACKS

- SINGLE SPOOL ROPE BLOCKS

- ENERPAC EQUIPMENT IN CRATE CONSISTING OF HYDRAULIC JUNCTION, BOX OF KZV2 HYDRAULIC CONTROL CENTRE 240V MOTOR, 5 x SHORT QUILLS & CASING TOOL

- HYDRAULIC POWER EQUIPMENT CONSISTING OF HYDRAULIC CONTROL CENTRE

- 5 x SITE BOXES


Inspection available on Monday the 7th of October from 9:00am to 12:00pm, and Monday the 14th of October from 9:00am to 12:00pm.

Condition of Site Entry

Enclosed Footwear MUST be worn onsite.


All items are sold ‘as is, where is’
All items at Ross’s Auctions are sold on an ‘as is, where is’ basis. This means the item is being sold in its current condition, regardless of any faults or damage. The bidder accepts full responsibility in satisfying themselves with the item prior to bidding. It is recommended that that if the bidder is in doubt, not to bid as no returns or refunds will be made. 


PICK UP: Goods to be collected from Wednesday the 16th to Monday the 21st of October, WEEKDAYS ONLY, from 8:30am to 4:00pm from Ross's Auctioneers & Valuers, 453 Orrong Rd, Welshpool, WA. (All goods must be removed by 4:00pm on Monday the 21st of October).

NOTE: To collect your goods, please ensure you have a valid form of Photo Identification present (such as a Driver's Licence) if you are requested to confirm your identity.

NOTE: Please adhere to the specified Collection Period to avoid any delays. All uncollected goods beyond the designated timeframe will be considered abandoned by the Buyer and subject to resale to recover Storage Fees. In the event of a late collection, a Late Collection Fee of $20 per item, per day, will apply starting AFTER the designated timeframe. Payment of all accrued fees of late-collected goods will be required for goods to be released.

Back to top